Water Saving
Please select a sub-category below.
Shower Timer is an electronic device for controlling the shower time, thus reducing peak hour queuing and saving water and heating energy.
Shower Timer uses patented microprocessor technology.
Shower Timer terminates the shower after a pre-determined time and that is followed by a “discouraging” shower prevention or waiting period.
Shower Timer is easily programmed by the owner for shower and shower prevention times between 0 and 12 mins.
Shower Timer is contained in a strong polycarbonate box located at the shower outlet.
Shower Timer is easily installed as a retrofit with no alteration to existing plumbing.
Shower Timer has a visual display which counts down the minutes and seconds remaining.
The visual display in Shower Timer is supported by an audible beeper.
Shower Timer is supplied with a low voltage safety approved power supply. Mains 240 volt power supply required either connected to a ceiling fan supply with double adaptor (can be done by a handyman) or switched outside the bathroom or hard-wired in by a qualified electrician.
500ml bottle
What is Aquatain?
Aquatain is a unique liquid silicone which spreads across the water surface, forming a very thin film that greatly reduces evaporation.
How much water do I lose to evaporation?
On average, a family swimming pool will lose more than 200 litres (50 gallons) to evaporation each day.
This can increase to nearly 300 litres (75 gallons) during the warmer months.
How much water will Aquatain save?
Aquatain reduces evaporation loss by approximately 50% every day.
How often do I need to apply Aquatain?
Aquatain should be applied once per week at the rate of 25ml (about 1 fl.oz) for an average family pool.
Is Aquatain easy to apply to my swimming pool?
Yes, Aquatain is easy to apply by simply pouring the measured amount directly onto the water surface.
Will Aquatain upset the chemical balance in my swimming pool?
No, Aquatain does not affect the chemical balance in pool in any way.
How soon can I swim in my pool after Aquatain has been applied?
Right away, there is no waiting. You can swim directly after applying Aquatain.
Will Aquatain leave a film on my skin after swimming?
No, the amount of Aquatain applied to your pool is small and you will not notice any residue or film on your skin.
Is Aquatain safe for the environment?
Yes, Aquatain is safe and does not have any negative impacts on the environment.
The sheer simplicity of this design invites anyone taking a shower to flick the water ON and OFF more easily than ever before. This elegant device encourages everyone in your family to switch the water off while soaping, shampooing, and shaving legs. Only a flick of the wrist is needed to turn the water completely OFF and back ON. Everyone would like to save water but it's too much trouble to turn off the water while soaping because you'd have to re-create the mixture. That is why we all just leave water running the whole time while we soap. But when it's this easy to PAUSE the water flow you instinctively flick off the water that you’d normally waste while soaping. Because soaping takes longer than rinsing The Every Drop Shower Saver® effectively doubles the amount of water set aside for showering, or put another way, you halve the amount of water used to shower!
* Prices include GST where applicable




